Category:ED20

Quick Setup

Quick Start Guide

• Connect USB cable for power
• Press Boot key to power up
• LED will start to blink from fast to slow (network registered)

Reference

• Demo video please see here https://www.youtube.com/watch?v=Lb7AdASDv7o
• Working status demo see here https://twitter.com/electro_phoenix/status/1003942697474895872

Customize Settings

• Set Sn number, set remote server IP address
• Commands

$setsn 761254011070  -> set sn number 
$setip 167.88.114.101  -> set remote IP address 
$setpot 8100 -> set remote server port 
$tcpip 0 -> TCP or UDP setup

• 

  Command to setup board SN number which is the last 12 digits on the module

• 

  Command to setup remote server IP address

Firmware Usage

• Default firmware pre-flashed in tracker version, code based on standard AT commands.
• Please find raw code in page MT2503, includes SDK and all examples.
• SDK and toolchain can be setup in 5 minutes

• Breakout board send GPS HEX data to server iot.electrodragon.com once power up, and server read HTTP socket data and generate HTML by python script.

Re-flash firmware

• We provide standard AT commands firmware, and tracker firmware, feel free to change it via USB update

• 

  Update firmware

• Connect USB Cable
• Press Start in QFlash first
• Hold boot key on board to boot up

Remote Test Server

HTML Webpage Map

• Old customize map python script can be found here https://github.com/Edragon/ED20-webserver

Server Script:

• All board tested before send, when you receive board, you can try with SN-number to see the last record in our factory, for example:
• HTML address1 google map: http://iot.electrodragon.com/gps/g-000161300171.html
• HTML address2 gaode.com map : http://iot.electrodragon.com/gps/a-000161300171.html  (CN address with map fixed, an issue in China)
• Support to send by HTTP RESTful coordination data to thingsboard.io (need to build your own server, script embedded our API number)
• You can build up your own server to further customize your tracking.

UDP Test Server

• Board default set to our UDP test server
• Please find server info here: https://www.electrodragon.com/w/Server