STM32NBIOT

From ElectroDragon Wiki
Revision as of 18:26, 20 May 2021 by Chao (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Hardware

  • Schematic please see here:
STM32NBIOT SCH.jpg

Code

  • Default demo code is located at https://github.com/Edragon/NBIOT
  • All code in Keil MDK ARM IDE, please install this first
  • In folder nbiot/software/STM32_NBIOT/r3
  • more example demo code could be found at - nbiot/software/BC95-STM32L151C8T6 Notice: the project file is old, please use default new project as template (nbiot/software/STM32_NBIOT/r3)

Quick start

  • Board is pre-flashed with default firmware, you can insert NBIOT SIM card, attached battery to start
  • LEDs will blink in sequence first, and then all light up to indicate the initation processures
  • Finally, PB9 LED blink to indicate each time data send
  • Online received data default send to our UDP server her, you can open webpage to see result: https://www.electrodragon.com/w/Server#UDP_server

Documents