SIM868 Debug

From ElectroDragon Wiki
Revision as of 14:53, 21 January 2022 by Chao (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Problem: Can not correctly receive the GNSS output

AT+CGNSINF
+CGNSINF: 0,,,,,,,,,,,,,,,,,,,,
  • This is a problem of the latest simcom firmware, it does not happened in old modules, but in new modules.
  • The GNSS output port baudrate at 9600, but UART2 baudrate is not at 9600 by default, these two should be set to match



Solve:

  • Set the correct baudrate for UART2 before to receive GPS data
  • by commands AT+CGNSIPR=9600


  • We tested all units before send, but the commands data maybe not saved into module, we are still looking for better solutions?


send PMTK commands

AT+CGNSCMD=0,"$PMTK000*32"


Version

AT+GSV

SIMCOM_Ltd
SIMCOM_SIM868
Revision:1418B03SIM868M32_OFO

AT+CGNSVER

AXN_5.0_3333_17022400,0000,B03V02SIM868_11,

check GNSS version

AT+CGNSVER
AXN_3.82_3333_16092900,0000,,*2A
AXN_5.0_3333_17022400,0000,B03V02SIM868_11,