ESP LED Board SDK

Quick Start Guide

• See the general board setup on this page.
• How to flash firmware and entering into flash mode please see here ESP_LED_Board_HDK#Enter_Into_Flash_Mode
• Set unique and complex your own control ID (module ID and topic), for example named ID is electroled, than full ID is "ESP-electroled"
• Control command is, for exmaple, change light to green, hex command is #00ff00.

Usage

• Use with NodeMCU LUAT WS2812

arduino - ESP8266 - webserver sketch

• web server control simple sketch - https://github.com/Edragon/arduino-esp8266/blob/master/Sketchbooks/BSP/NWI1124/webserver-path-1/webserver-path-1.ino

APP MQTT Dashboard commands reference

• use in MQTT Dashboard

Send	Function	Demo code
1ON/1OFF, 2ON/2FF	Turn ON or OFF
0 ~ 255	Set light brightness
RGB Color	Hex value: #6FC2F4	Supported
RGB Color	rgb(244,44,244)

Reference

Orignal Firmware avaialble here. Demo code

• arduino demo code - arduino http server
• frizzby rgb led code - iphone control
• Hue Emulator - philips Hue

Topics

• H801 protocol
• https://github.com/CurlyWurly-1/ESP8266-H801-MQTT/
• nodemcu lua - https://github.com/ssk181/h801-led-mqtt