20PCS Infrared Transmmiter LED
Dimensions
- Lens: Water Clear
- Material: GaAs
- Color:Infrared
- Unit:mm, tolerance: +/-0.25mm
Parameters
| Parameter | Max Value | Unit |
|---|---|---|
| Power | 100 | mW |
| Pulse Current | 60 | mA |
| Forward DC current | 30 | mA |
| Reverse DC Volt | 6 | V |
| Operational Temperature | ―55℃ to+100℃ | |
| Storage Temperature | ―55℃ to+100℃ | |
| Soldering Temperature | 260℃ for 3 seconds |
Lighting Characters
| Parameter | Symbol | Min. | Standard | Max. | Unit | Condition |
|---|---|---|---|---|---|---|
| Lighting angle | 2θ1/2 | 30 | deg | IF=20mA | ||
| Lighting distance | L | 12 | 15 | M | ||
| Peak value wave length | λp | 940 | nm | IF=20mA | ||
| forward volts | VF | 0.9 | 1.3 | V | IF=20mA | |
| reverse volts | IR | 5 | uA | VR=5V |
- This brightness based on the brightness of the human eye induction curve simulation luminous intensity meet CIE (Commission International Organization light)
- The measurement of the light-emitting angle half its brightness when testing data
- Brightness error plus or minus 15% guarantee
Wiring
You can run the IR LED like normal LED, adding current-limit resistor is necessary.
