DAPLink SDK

Features

• WIN10 driver free, but may need install in WIN7/8
• Support Coretxt M3, M4 series, designed and used by ARM, (St-link for STM32 but designed by ST)
• Support NRF51822 boards, tested with our nrf51822 board in arduino IDE
• Work well in MDK IDE, but not well supported in IAR, please notice. See right.
• Also support debug in MDK IDE

• CMSIS DAP support Cortex-A/R/M all series, but software reset only work for Cortex-M0/3/4/7
• Speed test

Installation for WIN7/8

• 

  install guide 01

• 

  02

• 

  03

• 

  04

• After this steps, click confirm when warning out, installation will be finished.

In case if failed

• If the driver install correctly, no need following steps
• Check if your system is 32bit or 64bit
• replace mdmcpq and mdmcpq.PNF files in C:\Windows\INF folder
• according to your system, copy usbser.sys file, and replace C:\Windows\System32\drivers in this folder
• reinstall the driver

Supported Programmer

• Keil
• PSoC Programmer from cypress

Via Python CMD Line

• DAPCmdr - https://github.com/Edragon/DAPCmdr

• 

  DAPLink on PSoC Programmer

Documents

• File:DAPlink driver.zip