T24 Serial to Ethernet Module
Working Mode
The module supports four work mode:
| Work Mode | Description |
|---|---|
| TCP-Client | module will first connect to TCP server module, and make long connection for transparent data communication |
| TCP-Server | module will first connect to gateway, and allow four clients connect in and send data. |
| UPD | module does not make active connection, only forward data when data is incomming. |
| UPD-server | based on normal UPD mode, change targe IP who sent data to source data IP, support multiple IP working mode |
- TCP-client is the default mode, parameters:
- IP address of the module: 192.168.0.7
- Subnet Mask module: 255.255.255.0
- Module Default Gateway: 192.168.0.201
- Serial port baud rate: 115200
- Connection target IP: 192.168.0.201
- Connection to the target port: 8234
Extra functions
- RS485: RTS or EN can be used as enable pin for RS485
- Link: when connect made the link pin keep low, in TCP mode will turn to low, in UPD mode will always be low, used pin CTS or link.
- Reset function: when TCP client connection failed over 30 times, module will restart
- ID: can set ID in setup tool