Difference between revisions of "RPI RMP HDK"

Latest revision as of 17:31, 7 November 2024

You can leave the RTC and battery for beginning, it not necessary to drive the RGB matrix panel.
Switch can turn to P3 chain side to enable P3 HUB75 output.
To drive one panel, connect P1 Port to your panel HUB "IN"
Supply Power at least 3-5A 5V to LED panel.

Double check your panel specifications, we only support for our type panels. Different panel specification may need revise the code.

To use RTC DS1307, please don't forget to turn on IIC interface in "raspi-config", and switch turn to up.
IIC interface can leave on if not used P3, when you only use P2 and P3

Notice more about the customize version issue before ordering - https://github.com/hzeller/rpi-rgb-led-matrix/issues/797

@@ Line 20: / Line 20: @@
 * Notice more about the customize version issue before ordering - https://github.com/hzeller/rpi-rgb-led-matrix/issues/797
-== Detailed Pin Definitions ==
-* ROW_A = 22
-* ROW_B = 23
-* ROW_C = 24
-* ROW_D = 25
-* ROW_E = GPIO 15
-* OE = GPIO 18
-* CLK = GPIO 17
-* LAT (STROKE) = GPIO 4
-* P0 R1/G1/B1 = 11 / 27 / 26
-* P0 R2/G2/B2 = 8 / 9 / 10
-* P1 R1/G1/B1 = 12 / 5 / 6
-* P1 R2/G2/B2 = 19 / 13 / 20
-* P2 R1/G1/B1 = 8 / 2 / 3
-* P2 R2/G2/B2 = 26 / 16 / 21
 [[category: RPI RMP]]