RPI RMP HDK

From ElectroDragon Wiki
Revision as of 17:31, 7 November 2024 by Chao (talk | contribs) (→‎Detailed Pin Definitions)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Quick Setup

  • You can leave the RTC and battery for beginning, it not necessary to drive the RGB matrix panel.
  • Switch can turn to P3 chain side to enable P3 HUB75 output.
  • To drive one panel, connect P1 Port to your panel HUB "IN"
  • Supply Power at least 3-5A 5V to LED panel.
  • Double check your panel specifications, we only support for our type panels. Different panel specification may need revise the code.


Board schematic, Functions

  • Board schematic

  • Board Pin Definitions

  • To use RTC DS1307, please don't forget to turn on IIC interface in "raspi-config", and switch turn to up.
  • IIC interface can leave on if not used P3, when you only use P2 and P3
Retrieved from "http://w.electrodragon.com/w/index.php?title=RPI_RMP_HDK&oldid=33067"