Category:Nuvoton SDK
(Redirected from Nuvoton SDK)
ICP LDROM Programming
- Upload LDROM an APROM use ICP tool
Note
- LDROM = Bootloader
- APROM = User Application
Config
| Header text | Header text | Header text |
|---|---|---|
| Boot from | LDROM / APROM, use LDROM | Example |
| PWM status under OCD Halt | tri-state or PWM continious | Example |
| LDROM size | 4K | - |
| P2.0/RST config | input | - |
| OCD Enable | OK | - |
| Security Lock | NOK | - |
| Brown-out Detector Options | 2.2V all tick options | - |
| WDT Options | disable | - |
ISP APROM Serial Programming
- upload later APROM use NuvoISP tool
Serial Download Note
- Need run hex2bin to convert bin file, MCU only support BIN download
- Please use above post build method for bin file when compile.
- need reset/repower MCU before and after flash.
GIF Tutorial
Animation setup
Upload bootloader by Nulink and use serial upload, animation
Connect pins 3.3V, CLK, DA, RST, GND to board, should only use 3.3V for n76e003, auto detect IC.
Post process job for hex2bin
- Post-process job, run hex2bin to convert hex to bin for serial download
C:\Users\Administrator\Desktop\N76E003串口下载工具\hex2bin\hex2bin.exe .\Output\GPIO.hex
Github
Documents
- Datasheet, BSP reference project code, keil driver, programmer please find here. https://github.com/Edragon/Nuvoton.git
Pages in category "Nuvoton SDK"
The following 2 pages are in this category, out of 2 total.