Domoticz

domoticz setup by HTTP

• Install https://domoticz.com/downloads/ normally in windows
• after installtion, open webpage to setup

Create "hardware"

• add "hardware" - > "dummy" - virtual switch

Create "device" switch

• after created hardware, creat "devices" -> you can click "Create Virtual Sensors"
• Setup -> type switch, name any
• back to menu switches, edit this switch, ON action set to http command -> http://192.168.1.109/control?cmd=gpio,13,1
• OFF action same to http://192.168.1.109/control?cmd=gpio,13,0
• Both relay can be setup, in switches manu, click the bulb to checkout if can work or not, or use domoticz app

Create "device" DHT22 sensor

• click "Create Virtual Sensors" again -> create temp+hum type sensor device
• very important to remember to IDX number, this should be later set in espeasy - device - your DHT22 sensor setup
• Data should appear soon on server page too.

Device control via HTTP

• Simple command http://192.168.1.109/control?cmd=gpio,13,1