STM32 Arduino

From ElectroDragon Wiki
Revision as of 22:44, 30 April 2020 by Chao (talk | contribs) (Created page with "=== Arduino === * In arduino IDE install arduino SAM board first ("for arduino zero"), so toolchain "arm-none-eabi-g++ " installed * Git clone into arduino\hardware folder {|...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Arduino

  • In arduino IDE install arduino SAM board first ("for arduino zero"), so toolchain "arm-none-eabi-g++ " installed
  • Git clone into arduino\hardware folder
Github Support hardward Support software
STM32 Arduino F1, F3, F4
Arduino_Core_STM32 F0~F7, L0~L4
  • Hardware programmer use ST-LINK, install driver, you can find it here
  • Connect with our STM32F103C8T6 board, upload blink sketch onto PB12 pin.
  • Support arduino library - here