MP-STM32F4

From ElectroDragon Wiki
Revision as of 14:11, 20 July 2022 by Chao (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Micropython Firmware / Bootloader

For STM32F405RGT

  • Upload firmware hex by ST-link, no need reset pin
  • Flash Firmware - TPYBoardV102.hex
  • Reboot board and connect by USB, it will format itself, two LEDs ON, this takes 3-5 seconds
  • after this, U-disk will show up and sequential LED blink.
  • Now can upload new sketch into it.

Demo Code And Reference Link

Demo Test for accelerator

More Notes

  • Use devices delete and pop out devices safely option in windows
  • reconnect USB cable and device to fully reload code


Other Similar Boards

  • ISOCORE
  • TYP_Board