MSP430-Flasher

• https://www.ti.com/tool/MSP430-FLASHER
• https://www.ti.com/lit/ug/slau654e/slau654e.pdf?ts=1607333072271&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FMSP430-FLASHER

Example MSP430F149

c:\ti\MSPFlasher_1.3.19>MSP430Flasher -n MSP430F149

• * -----/|-------------------------------------------------------------------- *
• * / |__ *
• * /_ / MSP Flasher v1.3.19 *
• * | / *
• * -----|/-------------------------------------------------------------------- *
• *
• * Evaluating triggers...done
• * Checking for available FET debuggers:
• * Found USB FET @ COM266 <- Selected
• * Initializing interface @ COM266...done
• * Checking firmware compatibility:
• * FET firmware is up to date.
• * Reading FW version...done
• * Setting VCC to 3000 mV...done
• * Accessing device...done
• * Reading device information...done
• *
• * ----------------------------------------------------------------------------
• * Arguments  : -n MSP430F149
• * ----------------------------------------------------------------------------
• * Driver  : loaded
• * Dll Version : 31400000
• * FwVersion  : 31100001
• * Interface  : TIUSB
• * HwVersion  : U 1.40
• * JTAG Mode  : AUTO
• * Device  : MSP430F149
• * EEM  : Level 2, ClockCntrl 0
• * VCC OFF
• * ----------------------------------------------------------------------------
• * Powering down...done
• * Disconnecting from device...done
• *
• * ----------------------------------------------------------------------------
• * Driver  : closed (No error)
• * ----------------------------------------------------------------------------
• */

Example MSP430G2553 2-Wire JTAG

• c:\ti\MSPFlasher_1.3.19>MSP430Flasher -n MSP430G2xx3
• * -----/|-------------------------------------------------------------------- *
• * / |__ *
• * /_ / MSP Flasher v1.3.19 *
• * | / *
• * -----|/-------------------------------------------------------------------- *
• *
• * Evaluating triggers...done
• * Checking for available FET debuggers:
• * Found USB FET @ COM266 <- Selected
• * Initializing interface @ COM266...done
• * Checking firmware compatibility:
• * FET firmware is up to date.
• * Reading FW version...done
• * Setting VCC to 3000 mV...done
• * Accessing device...done
• * Reading device information...done
• *
• * ----------------------------------------------------------------------------
• * Arguments  : -n MSP430G2XX3
• * ----------------------------------------------------------------------------
• * Driver  : loaded
• * Dll Version : 31400000
• * FwVersion  : 31100001
• * Interface  : TIUSB
• * HwVersion  : U 1.40
• * JTAG Mode  : AUTO
• * Device  : MSP430G2xx3
• * EEM  : Level 1, ClockCntrl 1
• * VCC OFF
• * ----------------------------------------------------------------------------
• * Powering down...done
• * Disconnecting from device...done
• *
• * ----------------------------------------------------------------------------
• * Driver  : closed (No error)
• * ----------------------------------------------------------------------------
• */