Category:Modem
Windows Reference Guide
WIN 10
- GIF guide & demo below
EC20 is driver free for Windows 10, directly use
WIN 7
01
02
03
Linux Reference Guide
PPP Dial For SIM868
- sudo apt-get install ppp
- sudo su
- cd /etc/ppp/peers
- cp provider gprs
- edit gprs file, see on image
- pppd call gprs &
- ifconfig eth0 down
- ifconfig wlan0 down
- ifconfig check if ppp net card is avaialble, and ping to 163.com
Driver free for SIM5360 in Linux
- Just connect via USB cable directly: Bus 001 Device 006: ID 05c6:9000 Qualcomm, Inc. SIMCom SIM5218 modem
wwan0 modem
recorgnized USB device SIM5360E
Wvdial
Install
- by command sudo apt-get update and sudo apt-get install ppp usb-modeswitch wvdial
Obsolete
- Get modem config file: tar -xzvf /usr/share/usb_modeswitch/configPack.tar.gz 05c6\:9000 (get error on this step, probably no config file yet )
- Config the default USB modem by nano /etc/usb_modeswitch.conf, copy message content
Config
- Config for SIM7600
- Config version 1 nano /etc/wvdial.conf
[Dialer 3gconnect]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","internet"
Stupid Mode = 1
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
Modem = /dev/gsmmodem
Username = { }
Password = { }
Baud = 460800
- Config version 2
[pialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"ip","uninet"
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB2
ISDN = 0
Phone = *99#
Password = card
Username = card
- Config version 3
[pialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB2
ISDN = 0
Phone = *99#
Password = card
Username = card
Connect
old
sudo usb_modeswitch -c /etc/usb_modeswitch.conf wvdial 3gconnect
new
sudo /usr/bin/wvdial&
kill
ps -A sudo kill 499
auto start
sudo nano /etc/rc.local add /usr/bin/wvdial& before exit0
References
Linux
This category currently contains no pages or media.