DAPLink HDK

Based on STM32F103

• Official DAPlink hardware design git - https://github.com/ARMmbed/mbed-HDK/tree/master/Bare%20Design%20Projects/ARM-mbed/INTERFACE%20DAPLink
• x893 hardware design git - https://github.com/x893/CMSIS-DAP
• F042 firmware - https://github.com/devanlai/dap42-hardware

• 

  F042 SCH 01

• 

  F042 Board design use pogo pins

• 

  Software configuration

• 

  STM32F103C8T6 SCH JLX

• 

  STM32F103C8T6 SCH 01 X893 version

• 

  DAP Link F042 DAP42 SCH

• 

  CMISIS DAP SCH WJQ

• 

  DPR1100-ED-DAP-LINK Version

firmware

Official Git

https://github.com/ARMmbed/DAPLink

• Use DAPlink firmware, generate MDK files

run command to update tools:

pip install virtualenv
virtualenv venv

again to generate MDK files

venv/Scripts/activate.bat
pip install -r requirements.txt
progen generate -t uvision
venv/Scripts/deactivate.bat

open any lpc11u35 started folder, "tiny" here, open by MDK and choose "migrated to device pack", compile and can flash into DAP link, device "LCP11U35FHI33" here.

Other

• Keil MDK 5 in Pack Installer ->install CMSIS 4.5.0，and install to Keil, in folder Keil_v5\ARM\Pack\ARM\CMSIS\4.5.0\CMSIS\DAP\Firmware
• Raw firmware demo code in Keil 5 - C:\Keil_v5\ARM\PACK\ARM\CMSIS\5.0.1\CMSIS\DAP\Firmware\Examples\LPC-Link-II
• Firmware JLX (similar to x893) - File:CMSIS-DAP.zip
• Firmware dap42 (F042) - https://github.com/devanlai/dap42
• Firmware x893 hardware design git (F103)- https://github.com/x893/CMSIS-DAP

Driver and use guide

• File:CMSIS-DAP-INF.zip
• CN step by step images guide - File:CMSIS-DAP use guide.pdf