EDAtiny

This is a protected page.

File:Edatiny.gif

Read Note First

• The board won't be regonized BUT it is OK. No problem for uploading sketch
• Please check the GIF below, plug the board to USB while arduino IDE inform you.

Install digi-spark boards

• Copy following into preference -> http://digistump.com/package_digistump_index.json
• Install digi spark from board management.
• More reference guide could see here https://digistump.com/wiki/digispark/tutorials/connecting

Upload demo sketch (Default sketch)

• Use arduino example sketch, change buildinLED to 1 for EDAtiny
• ONLY plug in USB cable when starting to upload sketch

Burning bootloader

Firmware - https://github.com/micronucleus/micronucleus/releases

• Use firmware - > release -> attiny85 aggressive.hex

• Our board already burned bootloader, use this only when things corrupted.
• Git clone bootloader project from here: https://github.com/Edragon/micronucleus, or download it from here

• High fuse DD, Low fuse E1, extend fuse FE.

Debug

• During upload sketch in you encounter any error, update the board driver to lisusb-win32 by AVR

Blink

• On board test LED is D1, please try pinMode(1, OUTPUT);

Driver

• https://www.electrodragon.com/w/File:Digistump.Drivers.zip