Difference between revisions of "RDM6300"

From ElectroDragon Wiki
 
(Replaced content with "https://w2.electrodragon.com/gollum/search?q=NID1005-dat.md")
Tag: Replaced
 
Line 1: Line 1:
 
https://w2.electrodragon.com/gollum/search?q=NID1005-dat.md
== Wiring ==
Pins are defined as follows:
* P1 port : 1.TX 2.RX 3.reserve 4.GND 5.VCC<br />
* P2 port : Antenna coil<br />
* P3 port : 1.LED 2.VCC 3.GND<br />
The arduino connection:<br />
* With module :TX to RX ; RX to TX; VCC to 5V; GND to GND<br />
* With LCD: RS => pin 12  RW => pin 11  EN => pin 10<br />
* D4, D5, D6, D7 => pins 5, 4, 3, 2<br />
 
* Demo code please see at https://github.com/Edragon/Arduino/tree/master/Sketchbook/16-RFID
== Documents==
* [http://www.electrodragon.com/wp-content/uploads/2012/04/RDM630-Spec.pdf Specification Read it here.]
* [http://playground.arduino.cc/Main/RDM630RFIDReaderLibrary Arduino playground tutorial]
 
[[category:125KHz RFID]]

Latest revision as of 14:49, 30 June 2025