Difference between revisions of "RPI RMP Guide"
(→FAQs) |
|||
| Line 7: | Line 7: | ||
* https://github.com/hzeller/rpi-rgb-led-matrix | * https://github.com/hzeller/rpi-rgb-led-matrix | ||
== Quick Start Guide == | == Quick Start Guide == | ||
=== Drive Notice === | === Drive Notice === | ||
Revision as of 18:01, 7 November 2024
RPI Software Setup SDK
Main Github
- Please ask for software support via github
- clone project https://github.com/hzeller/rpi-rgb-led-matrix/tree/master/adapter
- build the binary executable file, and use following commands
make -C examples-api-use
Quick Start Guide
Drive Notice
- The panels of the same size could have different drive (scan) methods, it depends on the panel's driver chip.
- please try different led-multiplexing, from 0~17
--led-multiplexing=0
P8 P10 Outdoor 32x16 (tested)
Run example for our selling 32x16 panel
- P10 - 32x16
./examples-api-use/demo -D 0 --led-cols=32 --led-rows=16 --led-multiplexing=8
./examples-api-use/demo -D 0 --led-cols=32 --led-rows=16 --led-multiplexing=3 ./examples-api-use/runtext16.ppm -D 0 --led-cols=32 --led-rows=16 --led-multiplexing=8 ./examples-api-use/demo -D 0 --led-cols=32 --led-rows=32 --led-multiplexing=1
- To chain other panel:
--led-chain=2 to --led-chain=4
- Other example will have the same configuration
--led-rows=8 --led-chain=2
32x32
- multiplexing =1
./examples-api-use/demo -D 0 --led-cols=32 --led-rows=32 --led-multiplexing=1
P4 64x32 (tested)
- multiplexing=0
./examples-api-use/demo -D 0 --led-cols=64 --led-rows=32 --led-multiplexing=0
- Tested panel is 64x32 P4-256x128-2121-A1
P3/P4 64x64 (tested)
Extra Setup Needed
- Setup P4 jumper to ground, P8 jumper to #E line
- multiplexing usually 0 or 1, try further options only when you have special board
CMD for both P3/P4
- ./examples-api-use/demo -D 0 --led-cols=64 --led-rows=64 --led-multiplexing=1
128x128 / 256x128
- Should be not supported
Panel Specifications
| Working Panel | Demo code | Panel Specification | Command |
|---|---|---|---|
| 32x16 P8 or P10 | 3216 | 1/4 | ./demo -D 0 --led-rows=8 --led-chain=2 |
| 32x32 P6 | 3232 | 1/8 | |
| 64x32 P4 | NA | 1/16 | |
| 64x64 P4 | NA | 1/32 |
Drive Demo
- The following demos are tested at 13th April
32x16
32x16 panel specs
6432 test01
6432 test02
64x64 test
64x64 P3 specs
64x64 P4 specs
More Types of Demos
Runtext demo 01
Runtext demo 02
- ./demo -D 1 runtext.ppm --led-no-hardware-pulse --led-slowdown-gpio=4 --led-cols=64 --led-rows=32