https://w.electrodragon.com/w/index.php?action=history&feed=atom&title=Sunxi-fel 2026-06-04T23:42:19Z Revision history for this page on the wiki MediaWiki 1.37.2 https://w.electrodragon.com/w/index.php?title=Sunxi-fel&diff=27537&oldid=prev 2020-07-10T07:54:01Z

<p></p> <p><b>New page</b></p><div>== Hardware == <br /> * Hardware use USB Port <br /> * '''Make sure use correct branch for board chips.'''<br /> * '''Remove perpherials like LCDs, camera, etc to avoid interferences, use high quality USB cable'''<br /> * Make sure no TF card or SPI flash<br /> <br /> === Enter into FEL Mode ===<br /> * maybe need install driver from phoenix tools<br /> * recognize as USB device: USB Device(VID_1f3a_PID_efe8)<br /> * Use windows sunxi-fel tools are faster<br /> <br /> * short connect Pin 1 and PIN4, then boot up board via USB power, this will connect SPI_CS to ground<br /> <br /> == Sunxi Tool Compile ==<br /> <br /> [[File:Sunxi fel flash USB.png|thumb|right]]<br /> <br /> For Zero do<br /> * git clone https://github.com/Icenowy/sunxi-tools.git -b spi-rebase<br /> For nano do <br /> * git clone https://github.com/Icenowy/sunxi-tools.git -b f1c100s-spiflash<br /> <br /> * 进入工具目录执行 make &amp;&amp; sudo make install<br /> * plug use device: Onda (unverified) V972 tablet in flashing mode [02B3]<br /> <br /> <br /> === Debug ===<br /> sudo sunxi-fel version #查看连接的cpu信息<br /> AWUSBFEX soc=00001681(V3s) 00000001 ver=0001 44 08 scratchpad=00007e00 00000000 00000000<br /> sunxi-fel -l<br /> USB device 002:003 Allwinner F1C100s <br /> <br /> <br /> sudo sunxi-fel spiflash-info #显示flash信息<br /> Manufacturer: Unknown (C2h), model: 20h, size: 33554432 bytes.<br /> <br /> === Flash ===<br /> * sudo sunxi-fel -p spiflash-write 0 Nano_flash_480272.bin<br /> E:\Git-category\Git-Allwinner\allwinner\SDK\Flash Tool\sunxi-fel\sunxi-fel_windows工具&gt;sunxi-fel -p spiflash-write 0 Nano_flash_800480.bin<br /> <br /> 60% [============================ ] 96.0 kB/s, ETA 01:10<br /> * sunxi-fel -p spiflash-write 0 E:\Git-category\Git-Allwinner\allwinner-f1c200s\Image\nano\images\Nano_pub_V4\image\Flash-16M\Nano_flash_800480.bin<br /> Windows Version:<br /> * Speed up to 90KB<br /> * Use zadig-2.4.exe install driver WINUSB<br /> * sunxi-fel -p spiflash-write 0 f1c200s.bin<br /> <br /> === Test ===<br /> * For LPI Nano, debug port is UART0 U0T U0R (please notice silk print maybe wrong, try to swap txd and rxd), baudarete 115200<br /> <br /> <br /> == Reference ==<br /> * GUI version - https://github.com/OtakuNekoP/bpi-fel-mass-storage-gui4win<br /> <br /> <br /> [[Category: Allwinner Programming]]</div>

Chao