Chao: /* Schematic */

2023-10-31T15:01:30Z

Schematic

New page

== Dimension ==
<gallery>
File:400240_dimension.png | EDL 3.2in Wide LCD
File:320240_size.png | EDL 3.2in LCD
File:2.4''_LCD_size.png | EDL 2.4in LCD
File:7.0''_LCD.png | EDL 7.0in LCD
File:5.0''_LCD.png | EDL 5.0in LCD

</gallery>

== Pins Definition and Wiring ==
=== EDL LCDs ===
* All LCDs are 16bit parallel data
{| class="wikitable sortable"
|-
! Size / resolution / color !! Driver
|-
| 2.4'' - 320*240 - 65K || ILI9341 <- ILI9325 (New V2.1) <- S6D1121 (Old V1.2)
|-
| 3.2'' - 320*240 - 65K || ILI9341 (TFT_320QVT_9341) <- [[SSD1289]] (TFT_320QVT)
|-
| 3.2''-W - 400*240 - 262K (discountined) || HX8352
|-
| 4.3'' - 480*272 - 16M || SSD1963
|-
| 5.0'' - 800*480 - 16M || SSD1963
|-
| 7.0'' - 800*480 - 16M || SSD1963
|}

* Module the user through the back of the PCB J3 pad set 8/16 bit interface, shorting J3 pad module in 16-bit mode, not less then work in 8-bit mode, module shipments default OPEN, which is shippedThe default is 8-bit interface, 8-bit mode, only 8 (DB8-DB15, DB0-DB7 ground or to unsettled to connect). 8-bit interface occupied IO than 16 interface occupied IO to 8 less, but more slowly, 16-bit interface occupied IO 8 more, but faster).

=== EDL ===
<gallery>
File:TFT01 2.4 pins.JPG| EDL 2.4 pins
File:TFT01 3.2 pins.JPG| EDL 3.2 pins
</gallery>
* Extra VCC, GND, LEDA (LED back light) also need to connect
* LED_A Pins for the back light of the screen, max volt at 3.2V, connect 20ohm for 3.3V, and 500ohm for 5V, as a current limited purpose.
{| class="wikitable sortable"
|-
! LCDs Pins !! Description !! Touch Pin !! Description !! SD Card Pin !! Description
|-
| RS || Data / Command || D_CLK || Clock || SD_SCK || Clock pin
|-
| WR || Write || D_CS || Chip Select || SD_DIN || Data in
|-
| RD || Read || D_DIN || Data in || SD_CS || Chip select
|-
| CS || Chip Select || D_DOUT || Data out || SD_DOUT || Data out
|-
| RST || Reset || D_PENIRQ || Interruppt
|-
| D0-D15 || Data Pin
|}
== Schematic ==

Discountined Boards TFT01
<gallery>
File:Pin_definition_2.4TFT01.jpg | 2.4‘’ TFT LCD Interface

File: TFT-01.jpg | TFT-01
File:IDTB_3.2_Display_-1.JPG | ITDB02-TFT Front
File:HX-TF320-2.jpg|ITDB02-TFT
File:HY32D.jpg | HY32D (w/o SD slot)
</gallery>

<gallery>
File:T2SSJOXkxbXXXXXXXX_1983351571.jpg| Wiring with MCS 51
File:Itdb02-pins1.png | wiring with arduino
</gallery>

[[category: EDL LCD]]

EDL LCD HDK - Revision history

Chao: /* Schematic */