https://w.electrodragon.com/w/index.php?action=history&feed=atom&title=Category%3AModem
Category:Modem - Revision history
2026-07-24T01:41:36Z
Revision history for this page on the wiki
MediaWiki 1.37.2
https://w.electrodragon.com/w/index.php?title=Category:Modem&diff=26616&oldid=prev
Chao at 05:55, 28 May 2020
2020-05-28T05:55:31Z
<p></p>
<p><b>New page</b></p><div>== Windows Reference Guide ==<br />
=== WIN 10 ===<br />
* GIF guide & demo below <br />
<gallery><br />
File:EC20_windows_10_modem.gif | EC20 is driver free for Windows 10, directly use<br />
</gallery><br />
=== WIN 7 ===<br />
<gallery><br />
File:Modern_connection_01.jpg | 01<br />
File:Modern_connection_02.jpg | 02<br />
File:Modern_connection_03.jpg | 03<br />
</gallery><br />
== Linux Reference Guide ==<br />
=== PPP Dial For SIM868 ===<br />
[[File:Sim868 ppp dial.png|thumb|right]]<br />
* sudo apt-get install ppp<br />
* sudo su<br />
* cd /etc/ppp/peers<br />
* cp provider gprs<br />
* edit gprs file, see on image<br />
* pppd call gprs &<br />
* ifconfig eth0 down<br />
* ifconfig wlan0 down<br />
* ifconfig check if ppp net card is avaialble, and ping to 163.com<br />
=== Driver free for SIM5360 in Linux ===<br />
* Just connect via USB cable directly: Bus 001 Device 006: ID 05c6:9000 Qualcomm, Inc. SIMCom SIM5218 modem<br />
<gallery><br />
File:2018-06-21_141320.png | wwan0 modem<br />
File:2018-06-21_141330.png | recorgnized USB device SIM5360E<br />
</gallery><br />
<br />
=== Wvdial ===<br />
==== Install ====<br />
[[File:Wvdial.jpg|thumbnail]]<br />
* by command sudo apt-get update and sudo apt-get install ppp usb-modeswitch wvdial<br />
<br />
==== Obsolete ====<br />
* Get modem config file: tar -xzvf /usr/share/usb_modeswitch/configPack.tar.gz 05c6\:9000 ('''get error on this step, probably no config file yet ''')<br />
* Config the default USB modem by nano /etc/usb_modeswitch.conf, copy message content<br />
==== Config ====<br />
* Config for SIM7600<br />
* Config version 1 nano /etc/wvdial.conf<br />
<source lang="text"><br />
[Dialer 3gconnect]<br />
Init1 = ATZ<br />
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0<br />
Init3 = AT+CGDCONT=1,"IP","internet"<br />
Stupid Mode = 1<br />
Modem Type = Analog Modem<br />
ISDN = 0<br />
Phone = *99#<br />
Modem = /dev/gsmmodem<br />
Username = { }<br />
Password = { }<br />
Baud = 460800<br />
</source><br />
* Config version 2 <br />
<source lang="text"><br />
[pialer Defaults]<br />
Init1 = ATZ<br />
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0<br />
Init3 = at+cgdcont=1,"ip","uninet"<br />
Modem Type = Analog Modem<br />
Baud = 9600<br />
New PPPD = yes<br />
Modem = /dev/ttyUSB2<br />
ISDN = 0<br />
Phone = *99#<br />
Password = card<br />
Username = card<br />
</source><br />
* Config version 3 <br />
<source lang="text"><br />
[pialer Defaults]<br />
Init1 = ATZ<br />
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0<br />
Modem Type = Analog Modem<br />
Baud = 9600<br />
New PPPD = yes<br />
Modem = /dev/ttyUSB2<br />
ISDN = 0<br />
Phone = *99#<br />
Password = card<br />
Username = card<br />
</source><br />
<br />
==== Connect ====<br />
[[File:Wvdial run.jpg|thumbnail]]<br />
old<br />
sudo usb_modeswitch -c /etc/usb_modeswitch.conf<br />
wvdial 3gconnect<br />
new<br />
sudo /usr/bin/wvdial&<br />
[[File:Wvdial run kill.jpg|thumbnail]]<br />
kill<br />
ps -A<br />
sudo kill 499<br />
auto start<br />
sudo nano /etc/rc.local<br />
add /usr/bin/wvdial& before exit0<br />
<br />
== References ==<br />
Linux<br />
* Reference find here: https://www.thefanclub.co.za/how-to/how-setup-usb-3g-modem-raspberry-pi-using-usbmodeswitch-and-wvdial<br />
<br />
[[category: Internet]]<br />
[[category: Mobile ]]</div>
Chao