View source for ESP LED Board SDK

== Quick Start Guide ==
* [[ESP_Board_Setup|See the general board setup on this page.]]
* How to flash firmware and entering into flash mode please see here [[ESP_LED_Board_HDK#Enter_Into_Flash_Mode]]
* Set unique and complex your own control ID (module ID and topic), for example named ID is electroled, than full ID is "ESP-electroled"
* Control command is, for exmaple, change light to green, hex command is #00ff00.

== Usage ==

* Use with NodeMCU [[LUAT WS2812]]
arduino - ESP8266 - webserver sketch 
* web server control simple sketch - https://github.com/Edragon/arduino-esp8266/blob/master/Sketchbooks/BSP/NWI1124/webserver-path-1/webserver-path-1.ino





=== APP MQTT Dashboard commands reference ===
* use in MQTT Dashboard
{| class="wikitable sortable"
|-
! Send !! Function !! Demo code 
|-
| 1ON/1OFF, 2ON/2FF || Turn ON or OFF || 
|-
| 0 ~ 255 || Set light brightness || 
|-
| RGB Color || Hex value: #6FC2F4 || Supported
|-
| RGB Color ||  rgb(244,44,244) || 
|}



== Reference ==
[https://github.com/Edragon/esp_firmware Orignal Firmware avaialble here.]
Demo code 
* [https://github.com/open-homeautomation/h801 arduino demo code] - arduino http server
* [https://github.com/frizzby/esp8266-rgb-led frizzby rgb led code] - iphone control 
* [https://github.com/probonopd/ESP8266HueEmulator Hue Emulator] - philips Hue 
Topics
* [https://www.domoticz.com/forum/viewtopic.php?f=51&t=7957 H801 protocol]
* https://github.com/CurlyWurly-1/ESP8266-H801-MQTT/
* nodemcu lua - https://github.com/ssk181/h801-led-mqtt




[[category: ESP LED Board]]