EDL LCD HDK
(Redirected from TFT01 LCD TFT Display)
Dimension
EDL 3.2in Wide LCD
EDL 3.2in LCD
EDL 2.4in LCD
EDL 7.0in LCD
EDL 5.0in LCD
Pins Definition and Wiring
EDL LCDs
- All LCDs are 16bit parallel data
| Size / resolution / color | Driver |
|---|---|
| 2.4 - 320*240 - 65K | ILI9341 <- ILI9325 (New V2.1) <- S6D1121 (Old V1.2) |
| 3.2 - 320*240 - 65K | ILI9341 (TFT_320QVT_9341) <- SSD1289 (TFT_320QVT) |
| 3.2-W - 400*240 - 262K (discountined) | HX8352 |
| 4.3 - 480*272 - 16M | SSD1963 |
| 5.0 - 800*480 - 16M | SSD1963 |
| 7.0 - 800*480 - 16M | SSD1963 |
- Module the user through the back of the PCB J3 pad set 8/16 bit interface, shorting J3 pad module in 16-bit mode, not less then work in 8-bit mode, module shipments default OPEN, which is shippedThe default is 8-bit interface, 8-bit mode, only 8 (DB8-DB15, DB0-DB7 ground or to unsettled to connect). 8-bit interface occupied IO than 16 interface occupied IO to 8 less, but more slowly, 16-bit interface occupied IO 8 more, but faster).
EDL
EDL 2.4 pins
EDL 3.2 pins
- Extra VCC, GND, LEDA (LED back light) also need to connect
- LED_A Pins for the back light of the screen, max volt at 3.2V, connect 20ohm for 3.3V, and 500ohm for 5V, as a current limited purpose.
| LCDs Pins | Description | Touch Pin | Description | SD Card Pin | Description |
|---|---|---|---|---|---|
| RS | Data / Command | D_CLK | Clock | SD_SCK | Clock pin |
| WR | Write | D_CS | Chip Select | SD_DIN | Data in |
| RD | Read | D_DIN | Data in | SD_CS | Chip select |
| CS | Chip Select | D_DOUT | Data out | SD_DOUT | Data out |
| RST | Reset | D_PENIRQ | Interruppt | ||
| D0-D15 | Data Pin |
Schematic
Discountined Boards TFT01
2.4‘’ TFT LCD Interface
TFT-01
ITDB02-TFT Front
ITDB02-TFT
HY32D (w/o SD slot)
Wiring with MCS 51
wiring with arduino
