STM8 Program

From ElectroDragon Wiki
Revision as of 12:02, 6 July 2020 by Chao (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Upload code

Stvp guide.png
  • Install ST toolset, which include ST visual programmer
  • Connect your ST-LINK, SWIM, RST, VCC better 3.3V, GND.
  • select and open hex file, select menu program -> current tap and done.

Use

  • programming via SWIM port, ST link programmer can be found on our store
  • When power up, LED should flashing, this is programmed for testing purpose
Retrieved from "http://w.electrodragon.com/w/index.php?title=STM8_Program&oldid=27498"