BMP280

From ElectroDragon Wiki
Revision as of 17:18, 27 October 2020 by Chao (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

BMP280/BME280 Schematic

  • Default mode IIC while CS pin is pull up
  • SDO connect to GND to set IIC address, remove SDO resistor to use SPI


Documents

BMP280

BME280

BMP180


Reference Guide

  • 300 … 1100 hPa
Sensor Name Description Interface Pressure output data resolution Temperature resolution Huminity Extra
BME280 Combined humidity and pressure sensor IIC, SPI 0.18 Pa 0.01°C 0.008 %RH Huminity
BMP280 Digital Pressure Sensor IIC, SPI 0.16 Pa 0.01°C power comsuption 2.7uA, Five bandwidths filter
BMP180 Digital Pressure Sensor IIC 1 Pa 0.1°C power comsuption 12uA